The HS Ski dry suit was designed specifically for slalom waterskiing enthusiasts.
PLEASE NOTE: The images to the left are actually our very similar HS Sail dry suit.
N100 top with 3mm Neoprene legs.
This is a fully watertight dry suit and you do not get wet in the legs as some might think.
On the top half, seams are single stitched and hand taped, legs are joined and taped on both sides for a longer lasting watertight seam.
Each drysuit comes with a FREE suit bag.
This dry suit is made to measure for maximum comfort. You can also add braces.
If you need any further details, please do not hesitate to either call us on 01474 704 123 or email email@example.com.
Nylon N100 tri-laminate, which is light and extremely strong, on the top with 3mm neoprene legs.
70g/sqm nylon on each side of a 100g/sqm butyl liner.
Amber/Black, Red/Black, Yellow/Black, Blue/Black or All Black (see image left)
Please call us on 01474 704 123 or email firstname.lastname@example.org and we will send you colour swatches of material.
Latex bellows neck seal fitted as standard.
Latex wrist seals fitted as standard.
8bdm (8 teeth per inch) neoprene coated rear entry dry zip fitted as standard.
(Fitted across our range as standard as they are strong enough without being too restrictive)
Latex waist seal. This atttaches the top to the neoprene legs and is glued to both.
Latex socks or ankle seals come as standard.
These are not fitted as standard as they are not always needed and can possibly get in the way.
Elasticated braces (see prices below)
Braces with quick release adjustable buckles can be of use if you need to take down the top of your suit without removing the whole dry suit.
This drawstring suit bag is FREE with your dry suit.
To order this dry suit, fill in your requirements and either order securely online or print out a measurement chart (688kb pdf) and fax it or send it by post.