The Industrial Dry Suit is an extremely robust made to measure drysuit that is used for river and lake maintenance, fisheries, culvert work and is used extensively by the Environment Agency.
The industrial dry suit is made from strong, flexible cordura/polyester and available in a range of colours.
All seams are single stitched and hand taped for a longer lasting watertight seam.
This dry suit is made to measure for maximum comfort. You can also add neoprene seals, Stihl Chainsaw Boots, pockets or change your zips.
We also sell a standard size version of this dry suit.
If you need any further details, please do not hesitate to either call us on 01474 704 123 or email firstname.lastname@example.org.
Cordura Polyester is a stronger, more flexible and heavier fabric.
160g/sqm Cordura weave outer, 160g/sqm butyl liner, 70g/sqm polyester inner.
Red/Black, Yellow/Black, Grey/Black or All Black (see images left)
Neoprene neck seal (2mm) fitted as standard.
The neoprene seals last longer and are warmer and are more comfortable.
Latex bellows neck seal (no extra charge)
Heavy duty Latex wrist seals fitted as standard.
We use the heavy duty versions on the industrial dry suit as they are more robust.
Neoprene wrist seals (2mm) (see prices below)
Neoprene seals last longer, are warmer and are more comfortable.
Although these are slightly more comfortable you don't tend to notice the difference you get with the neck.
Kevlar Gloves (4mm) £27.00 a pair
4mm Superstretch neoprene gloves with Kevlar reinforced palm and fingers
8bdm (8 teeth per inch) neoprene coated rear entry dry zip fitted as standard.
(Fitted across our range as standard as they are strong enough without being too restrictive)
Front Zip (8bdm) (see prices below)
Only recommended if you feel that you need to close the zip yourself. The rear entry is a much better position for the zip for donning this is due to the fact that when the rear zip opens the top part goes easily over your head.
With a front zip that goes diagonally from your left shoulder to right hip when open it does not increase the shoulder height of the suit so the top of your head has to drop below the shoulder height of the suit to get in, for some this can be difficult.
Main Zip Cover (see prices below)
Cover for the main front or back zip.
Fly Zip /Convenience Zip 11" 8bdm (see prices below)
A fly zip will allow you to relieve yourself without having to remove your suit, great if you spend a long time in your suit.
We also now fit them for women when they use in conjunction with a shewee.
Fly Zip Cover (see prices below)
This protects the zip and also looks neater.
1000 denier Cordura layer over the knee and shin area to protect the suit is fitted as standard.
The waist is elasticated at the rear.
Bekina Safety with steel toe and midsole fitted as standard.
Lighter than rubber or PVC by up to 40%
Thermo-insulating: cool in summer, warm in winter
Durable: lasts 3 to 4 times longer
Comfort: wider fitting
Safety: higher toecap
Slip resistance: improved sole profile, SRC approved
free cold-insulating and moisture absorbing insoles
great resistance to oil, fats and manure
Stihl Chainsaw Boots with added gusset (see prices below)
EN ISO 17249a, Class 3 (corresponds to 28 m/s), for chainsaw operators, laced rear leg, reflective band, suitable for spikes.
We increase the top circumference of the boots so that the chainsaw protective clothing worn underneath can go down inside the boots and not get stuck at the top of the boots.
This will then a give greater protection to all the way down to you ankles.
You may add one of our pockets as extra option.
Concertina pockets, these lay flat when not in use.
Lay Flat Pocket (10" x 7" x 2") (see prices below)
These are not fitted as standard as they are not always needed and can possibly get in the way.
Elasticated braces (see prices below)
Braces with quick release adjustable buckles can be of use if you need to take down the top of your suit without removing the whole dry suit.
Our thermal layers, part of the Hammond Survival Wear range are perfect for both commercial and leisure wear use.
The CoreTek, is a single lined polar fleece 3 piece thermal, offering comfort and warmth allowing the wearer complete freedom of movement. These thermal layers comprise of long sleeve tops, leggings and socks.
The CoreTek X undersuit includes an extended seat cover in the top, and hand loops. The leggings have a drawstring waist and foot loops, whilst the top has a crew neck, to help retain warmth whilst not hindering the neck seal.
The polar fleece fabric is a compact material, keeping the wearer warm and the skin dry. It comprises of a technical stretch construction to allow the lateral movement of fabric.
The polar fleece material has been specifically designed for the CoreTek range. These undersuits can be worn under any make of drysuit.
To order an undersuit with your dry suit, simply choose the thermals option you want below. Please note, we will select the size of undersuit based on the size of your dry suit.
If you need more information or advice, please either call us on 01474 704 123 or email email@example.com.
To order this product, fill in your requirements and either order securely online or print out a measurement chart (688kb pdf) and fax it or send it by post.