The RB140 dry suit is designed for use with standing jet skis, a harder wearing dry suit than the lighter RB100. They have also been successfully used for powerboating and RIB use.
Made to measure dry suit in the more robust N140 fabric.
All seams are single stitched and hand taped for a longer lasting watertight seam.
Each drysuit comes with a FREE drawstring suit bag.
This dry suit is made to measure for maximum comfort. You can also add neoprene seals, braces, boots or change your zips.
If you need any further details, please do not hesitate to either call us on 01474 704 123 or email [email protected].
Nylon N140 tri-laminate, which is a robust fabric.
160g/sqm nylon outer, 140g/sqm butyl liner, 70g/sqm nylon inner.
Orange/Black, Red/Black, Yellow/Black, Grey/Black, Blue/Black or All Black (see images left)
Latex bellows neck seal fitted as standard.
Neoprene neck seal (2mm) (see prices below)
The neoprene seals last longer and are warmer and are more comfortable especially if you think that latex seals are too tight.
Latex wrist seals fitted as standard.
Neoprene wrist seals (2mm) (see prices below)
Neoprene seals last longer, are warmer and are more comfortable.
Although these are slightly more comfortable you don't tend to notice the difference you get with the neck.
8bdm (8 teeth per inch) neoprene coated rear entry dry zip fitted as standard.
(Fitted across our range as standard as they are strong enough without being too restrictive)
Front Zip (8bdm) (see prices below)
Only recommended if you feel that you need to close the zip yourself. The rear entry is a much better position for the zip for donning this is due to the fact that when the rear zip opens the top part goes easily over your head.
With a front zip that goes diagonally from your left shoulder to right hip when open it does not increase the shoulder height of the suit so the top of your head has to drop below the shoulder height of the suit to get in, for some this can be difficult.
Fly Zip /Convenience Zip 11" 8bdm (see prices below)
A fly zip will allow you to relieve yourself without having to remove your suit, great if you spend a long time in your suit.
We also now fit them for women when they use in conduction with a shewee.
The RB140 dry suit has an elasticated waist at the rear.
The knees are reinforced with N140 tri-laminate fabric.
Latex socks or ankle seals come as standard with an elasticated polyester ankle seal guard.
Hard soled rubber boots (see prices below)
These are not fitted as standard as they are not always needed and can possibly get in the way.
Elasticated braces (see prices below)
Braces with quick release adjustable buckles can be of use if you need to take down the top of your suit without removing the whole dry suit.
This drawstring suit bag is FREE with your dry suit.
To order this product, fill in your requirements and either order securely online or print out a measurement chart (688kb pdf) and email to [email protected] or send by post.
Please note, all drysuits, whether made to measure or standard sizes, are manufactured to order. No stock is held in-house to enable you to customise your own drysuit.
